GSM Network Autodiallers and Interface Units

GSM Autodialler
GSM Autodialler

Low cost GSM autodialler, which delivers a pre-recorded voice message upon activation

Add to most alarm control panels and external equipments

All programming via keypad.

Dual triggers with the ability to dial up to 9 x 32 digit telephone numbers per trigger - 10 second recordable message per trigger

Programmable time delays for the dialler to become active after arming and for the dialler to dial out after triggering

Option to activate a built in sounder and to cancel both dialler and sounder from remote telephone

Requires either a pre-paid or contract SIM card - will operate with most SIM cards Auto-dialler dimensions 200 x 120 x 45mm

 

Kit contains:

  • 1 x GSM Auto-dialler
  • 1 x Fixing kit and installation & programming guide
  • 1 x rechargeable 7.2V batter

Operating voltage 12 volts d.c.

 
 

GSM Voice and Text Autodialler
An inexpensive and reliable GSM Alarm Autodialler that transmits pre-recorded speech messages to different telephone numbers. The GSM network is used and it is especially suitable for locations where there is no fixed telephone. 

Comes in wall mount metal box with antenna, antenna lead and control PCB/GSM Module. When an alarm input is activated unit automatically dials pre-programmed telephone numbers and a speech message is played and/or a text message is sent.

[Click on picture for connection diagram, Adobe.pdf  file format]

 

Click for GSM Technical Manual
                     

Description

  • 4 alarm inputs (either N.O, N.C, +12v trig, Gnd Trig)
  • 4 recorded speech messages up to 10 seconds/input
  • 4 SMS text messages
  • 4 remote control outputs
  • listen-in function (option)
  • 4 remote control outputs
  • Easy programming of up to 10 telephone numbers
  • SIM card programming using a GSM telephone keypad
  • Microphone for recording messages, speaker for checking recorded messages
  • Reset input for cancelling dialling

Specification

  • Input voltage 12 V d.c 
  • Current 45mA (idle), 340mA (active)
  • Controller PCB dimensions 105 x 76 mm
 

PSTN / GSM INTERFACE UNIT

GSM Back-Up for standard PSTN telephone line
Stand-alone telecommunication unit (instead of PSTN line)
Money saver in offices; GSM to GSM calls from desk phone ( Fixed Cellular Terminal )

VM3 can also be used in connection with different telephone equipment such as:
Alarm panels with built in digital communicator
Automatic voice, digital or signal telephone diallers
Standard telephone sets
PABX - private telephone exchanges
 

FEATURES:

  • Built-in GSM module
  • Interface between telephone equipment and GSM network
  • Transmits all data from Alarm control panel  (ID protocol, SIA)
  • Easy programming (SIM card in your GSM phone)
  • 2 LED monitoring
  • Anti-tamper switch
  • Standards: EMC 89/336 and CEI-79-2
  • 3 alarm inputs - 3 SMS messages
  • 2 service messages: - refill your SIM card (programmable time)
  • periodic test (1h - 240) message

APPLICATION:

  • Back-up security for standard PSTN line
  • Standalone unit instead of PSTN line
  • Money saver in offices - GSM to GSM calls from desk phone

TECHNICAL FEATURES

  • Power supply 12-16V DC, optional back-up battery 12V/1.2Ah
  • Current consumption : 60mA stand-by, 350mA transmitting-operating
  • PCB size in mm: 98×125
  • Box size in mm:  114×218×36
                                  

GSM Autodialler connected to Alarm Control Panel.

Easily installed in property - uses wireless PIR's, door/window contacts, panic buttons, smoke detectors and external PIR's. 

Ideal for holiday cottages, properties where no fixed telephone system is available or a second backup system is required.

 
 

GSM Autodialler and R1B Single Zone Receiver          

Easily installed in property - uses wireless PIR's, door/window contacts, panic buttons, smoke detectors and external PIR's.

Ideal for stables, barns, remote buildings and properties where no mains power supply is available. Powered by 85Ah leisure battery. Battery life approximately 1 month between charges.

Detector to receiver maximum transmission range, 500m line of sight. May be extended by use of High gain aerial.

[Up] [Home] [Email us for details & prices]
terms | design by scott